All orders are packed and shipped in our plastic free eco-friendly paper mailers.

ZERO WASTE Unisex Coat - PDF Sewing Pattern

£14.00

1
2
3
4
5
6
7
8
9
10 +

Quantity

Description
More Information

Sewing Level: Advanced Beginner

The ZW coat is an unlined unisex oversized coat with a batwing sleeve, round collar and patch pockets. The short coat has a front button closure and the long coat has a front button closure and waist tie. Also comes with tips on how to cut a lining if you want to add this.

This pattern comes with 2 options, a short and a long coat. The short coat is suitable for beginners and up, the long coat is more suited to mid-intermediate sewers, however if you make the short coat as your first project and progress to the long coat for your next one this would work well as a lot of the steps are the same.

Techniques used

Buttonholes, patch pockets, binding seams (optional), attaching a collar, hand sewing (optional)

PDF Pattern/Instruction Booklet: Includes measurements in both metric (centimetres) and US imperial (inches). Booklet/Templates are printable on both A4 or US Letter Paper size. Templates for the ZW Coat are provided in a separate document.

Explore other makes on insta #zwcoat

*see 'more content' for size chart*

This coat is cut against the grain (cross-wise) which means that the width of your fabric determines the length of your coat.

Fabric Type
Ideal in a mid heavy weight wool coating. This can also work in a lighter wool or cotton drill for more of a light jacket or trench coat style, you will need to make sure you fuse part of your collar if you choose a lighter weight fabric.

Size One
Recommended width

145 – 160 cm / 57 – 63 inches

Yardage required

Short coat: 140cm / 55 1/2 inches (approx 1.55 yards)

Long coat: 200cm / 78 inches (approx 2.2 yards)

Notions (Optional)

-Bias tape or binding. Approx 3 metres / 118 inches. This can be used to finish some of the seams on the inside and is a really nice finish when using heavy coating. You can use either a pre cut binding from a roll or cut your own using a lightweight cotton or linen.

-Buttons x 3. Recommended size 2 - 2.5cm / ¾ – 1 inch.

-Iron on fusing, approx 25cm / 10 inch. Only required if you are using a lighter weight fabric and is used to fuse the inside of the collar and front facings.

-Elastic or a length of cord. This is required if you are doing the short coat hack to gather in the back hem. The size of elastic is determined by how much you want to bring in the hem.

-Lining. This coat doesn’t need a lining but the booklet includes tips on how to add one if you want to for some extra warmth. More info in the booklet on this.

*SIZE CHART*

*Based on using a fabric that is 150cm / 59 inches wide. You can make this coat longer or shorter by choosing a fabric with a wider or narrower width. Please note if you need a longer arm length than the below measurement you will need to add more to your fabric usage. Add double the amount you need, ie to add 5cm / 2 inches your sleeve length your fabric usage will be 150cm / 59 ½ inches. This is particularly important for the SHORT COAT as if your sleeve is too short the arm band will sit higher on the arm and feel too tight. More detailed adjustment info is included in the pattern.

SIZE CHART SIZE ONE: Chest/bust 86-104cm / 33-40", waist 66-84cm / 26-33", hip 88-108cm / 34-42"

FINISHED GARMENT MEASUREMENTS SIZE ONE

Short Coat

-Length, shoulder to hem: 77cm / 30 1/4 inch

-Chest/waist/hem circumference: 185cm / 72 3/4 inch

-Sleeve/arm length, true shoulder point to sleeve hem: 57cm / 22 1/2 inch

-Sleeve bicep circumference: 42cm / 16 ½ inch

-Sleeve wrist circumference: 27cm / 10 ½ inch

Long Coat

-Length, shoulder to hem: 118cm / 46 inch

-Chest/waist/hem circumference: 162cm / 63 ½ inch

-Sleeve/arm length, true shoulder point to sleeve hem: 57cm / 22 inch

-Sleeve bicep circumference: 52cm / 20 inch

-Sleeve wrist circumference: 37cm / 14 ½ inch

Complete the look:

Large Check - Wool Fabric

£9.00

Out of stock

ZERO WASTE Unisex Coat - PDF Sewing Pattern

£14.00

Related products
Recently viewed

FAQ

How to order a matching thread?

When ordering fabric you can order a matching thread by clicking the the matching thread product beneath 'Complete the look'.

If you have ordered several different fabric products and want matching thread for just certain fabrics please leave instructions for this in the 'notes' box at checkout.

How do I order fabric?

All our fabrics are priced per half metre. E.g For 2 metres enter quantity 4. This will be cut as a continuous piece of fabric.

The minimum order is half a metre.

Can I collect my order?

Yes! We offer a 'pick-up' service at checkout, you will then receive an email when your order is ready to collect. Usually ready in 24 hours.

Click and collect excludes A0 printing service this is delivery only.

Can I Return my fabric?

Unfortunately we do not accept returns on cut fabric as these are bespoke items.

We always recommend ordering samples to ensure the colour and weight is what you are after.

If your order arrives faulty please contact sales@millcreations.co.uk to be sent a replacement.

Please read more in our policy for more information

Shipping

Fast shipping

All orders placed before 1pm are dispatched the same day, anytime after will be the next day. As a small business we try work as quick as we can, so far this system works and everyone has been happy!

Order tracking

When selecting your shipping options at checkout, second class delivery is tracked 48 hours and first class delivery is tracked 24 hours.

Get in touch

We are a small business based in Leeds, UK if you can call in for a chat to our haberdashery shop, alternatively email sales@millcreations.co.uk or call 0113317815